Masonry saw is a tool that you can use to cut a large amount of block and brick. Power masonry saws are available in two types which are hand held and table masonry saw. They are heavy duty saws that depending on the application, you can use them both for wet or dry cutting. Using a proper blade is a critical point that you should pay attention to for getting a good result in cutting process. For example for Dry Cutting you should pay attention to the type of the blade and be sure that is marked for dry cutting (like a silicon-carbide blade) and this process should be done in areas with proper ventilation or in large open areas because a lot of dust will be in a Dry Cutting worksite . In wet cutting process a hose feeds water to the blade. It is because water decreases dust and also help the blade to perform better. Generally blade of the handheld masonry saws is a silicon blade and in comparison with working with a chisel and hammer they are very quick you can cut much better with them. Tabled versions of power masonry saws are used when there is a lot of cutting and if the blade is made of industrial diamonds you will be able to cut through all kinds of bricks and blocks.